A solvent free 2 pack Epoxy Coating suitable for industrial flooring, food preparation areas, garages and workshops. It is very hard wearing and displays good chemical resistance. Available in 6 different colours.

HATCRETE® Diamond-Coat Epoxy Coating is suitable for use where a very hard wearing, dust free, hygienic, easy to clean floor topping is required.

It is very widely used on industrial or commercial floors in laboratories, showrooms, workshops, plant rooms and food processing areas etc. HATCRETE® Diamond-Coat Epoxy Coating is based on a blend of epoxy resin and curing agent binder, giving a very low odour.

 The product is supplied as two components, the epoxy resin component being pigmented. It gives high abrasion resistant properties and can be applied with a fine grit to increase slip resistance. A 5kg unit will cover approximately 25m2 per unit per coat. Two coats can be applied for heavily trafficked areas. Very porous surfaces may require more.

 HATCRETE® Diamond Coat Epoxy displays good chemical resistance to a wide range of chemicals and is resistant to light vehicular traffic. It is suitable for indoor use only.

 Please see colour chart and technical data sheet for further information below.

To arrange a call back for more specific information on Epoxy resin Coating, please fill in all of the following fields:
If you would like to send an enquiry via e-mail, please go to the "contact us" section.

* Contact Name:

* Telephone Number:

* Email Address:

* Verification Code:

* Enter Code Here: